Small Desk

This is a small desk that I built to go between the bookshelves.  The desk is built from the leftovers from the bookshelf build and finished with Danish Oil and wax.  

Honestly I think the bookshelves look better moved apart.

Bookshelves - Part 5

The bookshelves are finally completed and installed.  This was one of the largest projects that I have done, and I am incredibly pleased with the results.

Bookshelves - Part 4

Five coats of Danish Oil later...

Now on to the next bookshelf.

Bookshelves - Part 3

Gluing on the face-frame, again I need more clamps.

Custom molding

Molding installed with the first coat of Danish Oil.

Bookshelves - Part 2

Back panel glued on (I need more clamps!)

Fitting the face frame.  I am still figuring out how I want this to look so I haven't put the face-frame on yet.

All of the shelves are completed with a 1/4" thick piece of solid walnut glued to the front of each shelf.  The movable shelves were done with the Kreg Shelf Jig with only three holes per shelf.

Bookshelves - Part 1

I have put this project on hold, primarily because I knew that it would be a lot of work.  These bookcases will be 7' tall x 32" wide and will be made out of Walnut plywood and solid Walnut.  The case is joined together with 5mm domino's.

.

Getting ready for the first cut on the 4x8 sheet of Walnut.  At $130/sheet, this was a little unnerving.

Shelves

Side Panels

Using the Festool Domino to cut mortises for the case.

Mortises

Using the Kreg Shelf-Pin Jig to drill holes for movable shelves.

Dry-fit

All glued up in the clamps.