Bookshelves - Part 1

I have put this project on hold, primarily because I knew that it would be a lot of work.  These bookcases will be 7' tall x 32" wide and will be made out of Walnut plywood and solid Walnut.  The case is joined together with 5mm domino's.

.

Getting ready for the first cut on the 4x8 sheet of Walnut.  At $130/sheet, this was a little unnerving.

Shelves

Side Panels

Using the Festool Domino to cut mortises for the case.

Mortises

Using the Kreg Shelf-Pin Jig to drill holes for movable shelves.

Dry-fit

All glued up in the clamps.